Model: SFTT-TUFF-TAPE-20M
Manufacturer: STRAIT-FLEX
office@serafimov-systems.eu
STRENGTH, RELIABILITY AND FASTER APPLICATION FOR CORNER AND JOINT FINISHING.
STRAIT-FLEX® TUFF-TAPE is a high-strength composite tape designed as a reliable alternative to traditional paper drywall tape. It is intended for reinforcing internal corners and flat joints, as well as repairing areas where paper tape has been damaged or cannot withstand the conditions.
With a width of 57 mm and a thickness of 0.4 mm, TUFF-TAPE provides strong, durable reinforcement during joint finishing. Its composite structure makes it suitable for areas with increased humidity, where traditional paper tapes may become damaged. The material will not rust, resists blistering and tearing, and will not break down during sanding. According to the manufacturer, the tape is twice as strong as paper tape and stronger than standard mesh tape.
TUFF-TAPE is easy to cut with scissors or a utility knife and is applied using all-purpose joint compound. Its installation is convenient even for beginners, allowing easier positioning than traditional paper tapes.
The 20-metre roll is a practical choice for repair work, individual rooms and professional finishing projects where strength and efficiency are essential.
For internal corners and flat joints: Suitable for reinforcing joints and forming internal corners in drywall applications.
An alternative to paper tape: Designed for applications where greater strength and faster installation are required.
Suitable for areas with increased humidity: Can be used where moisture may damage paper tape.
High mechanical strength: According to the manufacturer, it is twice as strong as paper tape and stronger than standard mesh tape.
Resistant to common defects: Resists blistering, tearing and common cracking problems.
Will not rust or break down during sanding: Maintains its integrity throughout the finishing process.
Easy to cut and install: Can be cut with scissors or a utility knife and applied with all-purpose joint compound.
Practical 20 m roll: Suitable for repair and finishing projects of various sizes.
1. Surface Preparation
Check the drywall surface using a taping knife and remove any protrusions. If the knife catches on a screw head, drive the screw slightly deeper so that it does not interfere with smooth tape application.
2. Measuring and Preparing the Tape
Measure the wall height and subtract approximately 1–1.5 cm. Cut the required length of TUFF-TAPE using scissors or a utility knife.
Fold the tape in half along its centre crease, with the printed side facing outward. For more precise fitting in internal corners, the ends can be cut at a 45° angle.
When forming internal corners, fold the tape to an angle slightly narrower than the desired finished angle.
3. Preparing the Compound
Prepare the all-purpose joint compound according to the manufacturer's instructions. When applying TUFF-TAPE over painted surfaces, add STRAIT-FLEX Super-Bond or a suitable primer to improve adhesion.
4. Applying the Tape
Using a 4" or 5" taping knife, apply a smooth, generous layer of all-purpose compound to the corner or joint area.
Place TUFF-TAPE onto the wet compound. Adjust its position if necessary to achieve a straight, even line.
5. Pressing the Tape and Applying the First Coat
Press the tape firmly against the surface by sliding the taping knife along it. Apply slightly more pressure to the outer edges of TUFF-TAPE.
Immediately apply joint compound over the surface of the tape. Embed it firmly and smooth it evenly. Allow it to dry completely for several hours or overnight.
6. Removing Uneven Areas
Once dry, use a taping knife to identify and remove any raised areas or hardened lumps of compound.
7. Applying the Final Coat
Using a 6" taping knife, apply the final coat of joint compound, extending it slightly beyond the previous coat.
For internal corners, only a very thin layer of compound is required. Using lightweight finishing compound at this stage makes subsequent sanding much easier. Allow it to dry completely for several hours or overnight.
8. Final Sanding
Sand lightly using P120 abrasive paper. Unlike paper and standard mesh tapes, TUFF-TAPE maintains its integrity during sanding.
Brand: STRAIT-FLEX®
Model: TUFF-TAPE
Product type: Composite tape for corners and flat joints
Width: 57 mm
Thickness: 0.4 mm
Length: 20 m
Application: Internal corners and flat joints in drywall
Installation method: Applied with all-purpose joint compound
All texts, meta descriptions, technical instructions and product articles on this website are original copyrighted content owned by SERAFIMOV SYSTEMS Ltd. Product images are used with the manufacturer's official consent and granted rights.
Any unauthorised copying, rewriting, duplication or distribution of the textual content on other online stores, platforms or in printed publications without prior written permission from SERAFIMOV SYSTEMS Ltd. is strictly prohibited and may result in legal action under the Bulgarian Copyright and Related Rights Act.
Depending on the manufacturer's current production batch, the product packaging may differ from the images shown. The tape may be supplied in an individual cardboard box or on a roll.
No comments yet. Share your opinion!