Burgas, Odrin Str. 45 +359 879 545 111
lang EN
Road Marking Machine CMC AR30PROP2C Cold Spray Plastic 1:1
play

Road Marking Machine CMC AR30PROP2C Cold Spray Plastic 1:1

Road Marking Airless Machine, CMC AR30PRO-P-2C Cold Spray Plastic 1:1 2 airless hydraulic pumps 2 component cold sprayable plastics 1:1 ratio

● In stock

Model: CMC AR30PRO-P-2C COLD SPRAY PLASTIC 1:1

Manufacturer: CMC

-20%
31 546 € excl. VAT
25 236 € excl. VAT
30 283,20 € incl. VAT
The cost of delivery is calculated additionally when finalizing the order.
in installments
× unicredit
The calculator calculations are indicative. The bank may offer you different values ​​depending on your individual profile.
Monthly payment: 0.00 €
Total paid: 0.00 €
Increase in cost: 0.00 €
If you need additional information, you can contact us:

contacts 0879 545 111

mail office@serafimov-systems.eu

Product Description down

CMC AR30PRO-P-2C Airless Road Marking Machine

SPRAYABLE PAINTS: monocomponent not refractive paints (=without premixed glass beads) solvent based or waterborne paints, paints with specific formulation for airless machines with 70-75 KU viscosity at 20?C. Solvent based or waterborne epoxy paints. Polyurethane paints SUITABLE FOR: indoor markings, on concrete surfaces, for jobs requiring extreme handling in small spaces. For small road marking jobs, parking lots, sports fields, cycle lanes. For using 2 colours at the same time. With the suitable accessories for 2 component cold sprayable plastics, 1:1 ratio, external mixing spray-in-spray TECHNICAL DATA:Holder for 2 paint buckets (max diam. 32 cm)2 airless hydraulic piston pumps:-max. delivery 2 x 6,17 l/min-with 2 valves for independent regulation of 2 pumps2 removable paint guns can be used as manual gun (for stenciling) or as automatic gun controlled by lever (for line). Standard nozzle for 10-20 cm line (Line width can be ranged from 5 cm to 30 cm by changing nozzle and adjusting gun height. Striper can be also equipped for Cold Spray Plastic, 1:1, external mixing. Look at optional) Gun support with wheel: to follow the road2 paint hoses of 15 m2 high-pressure paint filtersMAX. LINE WIDTH: 50 cm(achievable using the 2 guns with a single colour) Gasoline engine:-power 9 HP-self-winding pull startHand push (It's possible to equip the line striper with HMC, the hydraulic motorized chariot. Look at optional) Parking brake on rear wheel Swivel front wheel, to stripe very sharp curves. It can be locked or unlocked during the work by a lever on handlebars. Steering hardness is adjustable by proper regulator Telescopic pointer for easily following pre-marking or precisely matching existing line Machine is equipped with all safety devices according to EU requirements.Machine conforms to: EU Directive 2006/42/EC on Machinery OPERATION OF MACHINEStriper is equipped with 2 independent paint circuits and 2 guns, in order to apply 2 colours at the same time (or a single colour striping 50 cm line).With proper equipment (look at optional), striper can also apply 2 component Cold Spray Plastic (mixing ratio 1:1, external mixing). External mixing, known as “spray in spray”, is a simple method, fast and easy to use: thanks to double head gun specifically designed for, the 2 components meet after they have been sprayed. Cold spray plastic (CSP) is a 2 component product based on reactive methacrylic resins (MMA) solvent free, well known for its high resistance to wear. The use of CSP 1:1 requires the manual pre-mixing of one of the components (A or B, depends on manufacturer) with a third component, the catalyst. OPTIONAL EQUIPMENT:- Hydraulic motorized chariot: transforms the push machine in a machine with drive. Useful to increase productivity, to finish works quicker and easier, with less fatigue. Indispensable to mark on slopes. With seat. (Look at TDS of HMC motorized chariot)- Kit for 1:1 external mixing consisting of:. 2 component CSP manual gun, 1:1 ratio, external mixing: for stenciling with cold spray plastic. support and lever control: allow to use 2 component manual gun as automatic gun for marking lines with cold spray plastic- Gravity glass bead dispenser (SUGGESTED OPTIONAL) consisting of:. gravity glass bead tank, capacity 24 l. bead dispenser, with adjustable width. Available in following widths: - 1 dispenser for line width 15 cm- 2 dispensers for 2 lines width 15 cm- 1 dispenser for line width 30 cm- 2 piston pulsation dampeners,to reduce the lenght of paint hoseWe suggest to complete the machine equipment with:- nozzle for line width 5 cm- nozzle for line width 30 cm- nozzle for surfaces, advised for stenciling (crosswalk, symbols, legends, stops, …).

Video Presentation down

Customer Reviews (5) down

Дончо Димитров ★★★★★
Date: 03.11.2018
Отлична бутална машина за студен шприц пластик!
Орлин Ставрев ★★★★★
Date: 02.01.2018
Добър ден, интересува ме цената на комплекта със задвижващото устройство и с пистолета за студен шприц пластик. Благодаря Ви.
Горан Иванов ★★★★★
Date: 29.06.2017
Работя с машината за пътна маркировка, която нашата община закупи наскоро.Много голямо улеснение за мен е да полагам пътна маркировка с нея. Страхотна е. Работя сам и постигам добри резултати.
Иван Иванов ★★★★★
Date: 22.03.2017
С машина AR30PRO - 2C нанасянето на пътна маркировка е лесна и приятна работа. Направена е така, че да е улеснена възможно най-много работата на оператора. Благодарности на Серафимов Системс!
Василев ★★★★★
Date: 29.08.2016
Машина AR30PRO - 2C е с много добри технически данни. Има големи възможности за работа и с двата пистолета. Удоволствие е да се работи с такава техника!